Lacquer Thinner (immediately after spray equipment or brush use)įollow all container health and safety cautions – Keep away from children. Special Note: ( For the BEST Result, when polishing out to a high sheen, the finish should cure for at least 21 days prior to any polishing operations.) Allow Stringed Instrument Lacquer toĪir Dry for 48 to 74 hours prior to final rub out. (this assures better flow and leveling of the final lacquer coat).ĩ. The price difference is a sure winner, if price were the only thing to consider. Behlens varies between 12 and 20 a quart plus shipping. Apply one Final coat at a 1-to-1 ratio of Lacquer & Mohawk Lacquer Reducer / Thinner Ive just discovered that a local establishment sells Mohawk instrument lacquer by the gallon. Wet sand with 400 grit wet / or Dry Paper & Mineral Spirits, clean surface & remove sanding residue with denatured alcohol on a clean white cotton rag.Ĩ. Allow to dry 24, or better, 48 to 72 hours.ħ. Repeat the step (#4) above 4 more times to give a total of five (5) Lacquer coats.Ħ. Apply one wet uniform coat of Stringed Instrument Lacquer at ready to use strength.ĥ. Note: If applying over filled and stained woods see those Mohawk product labels proper application and drying times.Ĥ. Surface should be finish ready (properly sanded and clear of oils, dirt or dust). Stringed Instrument Lacquer must be applied over Mohawk Vinyl Sealer in order to insure the unique film building and special finish performance characteristics.ġ. Stringed Instrument Lacquer allows for the typical expansion and contraction that can occur due to the unique construction of stringed musical instruments. Made to withstand the expansion and contraction that is characteristic of the unique construction of stringed instruments. Fisheye additive – $12.Classic Stringed Instrument Lacquer is a high quality nitrocellulose lacquer specifically designed for wooden stringed instruments. Nitrocellulose lacquer is the highest quality finish for guitars and other stringed instruments such as ukuleles and mandolins. Mohawk Finishing Classic Instrument Lacquer 1 Qt M610-1406 4.7 (228) 2564 FREE delivery Apr 5 - 11 Amazons Choice ColorTone Aerosol Guitar Lacquer, Clear Satin 4.7 (162) 370939.27 FREE delivery Apr 6 - 10 Small Business ColorTone Black Aerosol Guitar Lacquer, Black Gloss (3885) 4.6 (168) 3927 (3. Mohawk Stringed Instrument Lacquer 13 oz Brand: M MOHAWK 79 ratings 2400 Specifically as a high quality finish for thin, flexible tone-woods such as those used on stringed instruments. – Quart Lacquer Reducer – $ (we will be selling this under the Behlen Brand until supplies run out) LACQUER FLATTENER – Is used to reduce the sheen of gloss lacquer to semi-gloss, satin or flat. LACQUER FISHEYE FLOWOUT SMOOTHIE – Is used for elimination of craters or fisheyes. LACQUER RETARDER – Used when conditions cause blushing Repeat steps 4 and 5 building up to five coats of finish. Apply a wet uniform coat of Stringed Instrument Lacquer at ready to use strength. MOHAWK INSTRUMENT THINNER – Used with lacquer to promote flow-out and leveling. Allow to dry 1 hour and scuff sand to 320 or 360 grit smoothness. #M610-1406/4 – Gloss Classic Instrument Lacquer – 4 packĬLASSIC INSTRUMENT SEALER – Is better where a more demanding finish is required as it has better moisture resistance. #M610-1406 – Gloss Classic Instrument Lacquer – $ per can It allows for the special expansion and contraction that occurs due to the unique construction of stringed instruments. Product is supplied at ready to spray viscosity but can be thinned with lacquer reducer if necessary. Just as our Stringed instrument Lacquer in quarts, this aerosol is formulated specifically as a high quality finish for thin, flexible tone-woods such as. Mohawk® Classic Instrument Lacquer is a high quality nitrocellulose lacquer specifically designed to produce a superior finish on the thin, flexible tone woods used when making wooden stringed instruments. MOHAWK CLASSIC INSTRUMENT LACQUER – (Replaces Behlen Stringed Instrument Lacquer) This premium nitrocellulose lacquer is for finishing acoustic guitars and other stringed instruments. Stringed instrument Lacquer aerosol is formulated specifically as a high quality finish for thin, flexible tone-woods such as those used on stringed instruments and made to withstand the expansion and contraction found in the unique construction of stringed instruments. Will polish beautifully to a brilliant gloss or a silky satin. It has a pale color compared to most other amber lacquers and dries very hard. Mohawk Classic Instrument Finish – replaces Behlen Stringed Instrument Lacquer – a product we used for many years and featured in my video – “Spray Lacquer for Guitars” It is “hands-down”, the most forgiving, easiest finish to spray, flows out beautifully, and rubs out to a beautiful sheen.
0 Comments
Leave a Reply. |